16 Nov

Plant Spirit Shamanism Pusanga an interview with perfumeros

The healing power of fragrance.

Plant spirit shamanism, perfume, aromatherapy, scent, incense, shamanism, shamans, healing, herbs, herbalism, love, pusanga, relationships, ayahuasca, magic, sorcery

Fragrance has long been associated with the arts of love. In Japan, Geisha girls priced their services according to the number of incense sticks consumed during love-making, while in Indian tantric rituals, men were anointed with sandalwood, and women with jasmine, patchouli, amber, musk, and with Saffron crushed and smeared beneath their feet. In Europe in the 17 and 1800s, the use of eau de Cologne became a widespread and fashionable trend, where the morning ritual in many homes began with its application before a suitor of either sex would call upon a lover. This blend of rosemary, neroli, bergamot and lemon was also used internally, mixed with wine, eaten on sugar lumps, even taken as an enema, to refresh the inner self and cleanse the spirit so that lovers could meet each other with a pure heart. But it is, perhaps, in Peru, that the magic of perfumed love has reached its highest skill, in the formulation of pusanga, which is often referred to as the love medicine of the Amazon, although it is far more than that. Specialists in the use of fragrance to change luck and attract good fortune are known as perfumeros. One such specialist is Artidoro. Another is Javier Aravelo, an ayahuasca shaman who also works with fragrance.

Artidoro, how did your involvement with perfumes begin? The story of my path of medicine began when I saw a brother-in-law who healed and chanted I used to watch how the curanderos worked. I loved listening to what they talked about, how they prepared their remedies, their canticos [magical chants, similar to icaros]. Then I went off on my own deep into the jungle, to know the plants little by little, to smell the leaves and roots of all the different medicines. I had no maestro to learn from so I dieted plants for a year and a half alone, and then I returned to the city. I used agua florida, timalina, camalonga, and dedicated myself to studying all about smells.

How do you use perfumes to help people now? I get people coming for help with family problems where the woman has gone away from the man or the man has gone away from his children.

Supposing the woman has gone off, I use pusanga to bring her back so that the family can consolidate again. I call the plant spirits which work for that pusanga plants such as renaco, huayanche, lamarosa, sangapilla, and I call her spirit back to her home. Or lets say the mama is here with me and the father is far away. I pull him back so he returns to his home. In a short time he will be thinking of his children and his wife, and he comes back.

I dont need to have the actual plants in front of me, I call their spirits. I make my own perfumes from plants, no chemicals. They have wonderful smells, and I chant at the same time as I rub them on the children and the woman. Then the man starts thinking or dreaming of them.

12 Nov

How To Propagate Succulent Plants By Rooting Leaf or Stem Cuttings

Succulents are perfect plants for xeriscape gardens and are easy to root and grow. Once you learn how easy it is to propagate succulent plants, it’s a great way to expand your plant collection – and it’s free! You can use this planting technique with succulent plants from the Crassula family like Jade (C. ovata), Spoon Jade or Gollum Fingers (C. Portulacea, Rosary Plant (C. Rupestris), and Crassula tetragona. This propagation technique also works on other cactus and succulent plants like Aloe Vera, Echeveria, Aeonium and Baby Jade (Portulacaria afra).

Planting Succulent Cuttings: Start with a cutting about 4 – 6 inches long. Bury about half the stalk in soil. This will give you deep roots and helps the plant withstand drought better. Trim off the last few leaves to make a bare stalk if you need to. The leaves can be planted too; bury about half the leaf, cut side down. Most succulent plants and shrubs will form roots on the joints in their stalks.

Watering Succulent Plant Cuttings: Water every 2-3 days so the soil is moist (like a squeezed sponge). After a month, cut back to monthly watering. The leaves will probably shrivel a bit as the plant forms roots. The plant is living off the stored energy in its leaves. This is normal. You may also lose a few leaves, which is also normal. Do not use this as an excuse to over water!

Save all your broken parts and leaves. When I am repotting, I always save all my bits and pieces. Tuck them into the soil and leave a little green sticking out. Most parts will take root and grow into an extra plant.

How to Grow Succulent Plants: Succulent plants want heat and light. Outdoors most succulents take full sun to light shade. Some succulents will change colors in the sun and with the seasons. If you see brown, scabby spots, plants are getting too much sun. Aloe plants will turn orange in full sun.

Most succulents and cacti make excellent houseplants. They are already accustomed to a warm, dry environment, but they do need bright light. Indoors, most succulent plants can take sun near a window, or bright light. As a general rule of thumb, if there is enough sunlight for you to read, there is probably enough sun to make your plant happy. Outdoors, Aloe and Haworthia like bright light, but take less sunlight than most succulents. One or two hours of direct sun is usually their limit. They will turn orange if they are getting too much sun. Moving them to more shade will change them back to green.

A very light frost is usually no problem for succulent plants. A hard freeze, however, will freeze them solid. Outdoors, they can survive a frost if they have overhead protection. In freezing winter areas, bring you plants inside and put them in an area with lots of light.

How to Water Succulent Plants and Cacti: Succulents are native to places like South Africa, South America and the arid Southwest. Try to keep that in mind when you are picking a spot for your plants. Succulents and cacti are equipped to store water in their leafs and stalks so that they can survive long periods of drought. Indoors, drench the pot and then allow the soil to dry out between waterings. Outdoors, water them a few times during the hottest days of summer (if they look shriveled), otherwise, leave them alone. The fastest way to kill succulents is to over water them.

11 Nov

How To Clone Anthurium Plants Using Vegetative Cloning

Just how do anthurium growers fill requirements for anthurium flowers that may run inside the range of several million stems each year? They merely raise tens of thousands of anthurium plants to be able to create millions of blooms.

But where do these thousands and thousands of anthurium plants originate from? They’re produced by a method of anthurium propagation called tissue culture or vegetative cloning. With this particular process, you’ll be able to commence with 1 plant and produce tens of thousands of plants in a very small time period.

First, the cultivator selects an excellent specimen. This specimen is going to be replicated countless times, so a great deal of time and energy is placed into selecting the very finest specimen available. As soon as this important plant is chosen, the grower will take it to a laboratory.

Inside the laboratory, a technician confirms that the specimen is free of disease and next chops off a bit of it. Then the technician will sterilize the sample and set it into a beaker which contains an agar medium. This beaker in addition contains specific plant chemicals that trigger the specimen to develop a callus, which is actually an undifferentiated bunch of plant cells.

The callus is divided into many pieces and then permitted to grow. This particular technique is repeated numerous times. Once enough material is developed, the calluses are moved to a cultivation medium that includes plant chemicals which trigger the undifferentiated tissues to transform in to shoots and roots. This causes many hundreds of plantlets to grow from each callus.

Right after the plantlets have developed adequately, they are replanted directly into brand new beakers to mature further. When they’ve attained a size where they can survive in open air, they’re taken off the flasks and moved into pots. These brand-new plants are permitted to grow within the firmly governed conditions of a green house for a while. Then, after they have acclimated to developing in open air, they’re sent back to the cultivator for planting in to his farm.

4 Nov

How to Grow Grass Effectively by Learning How to Plant Grass Seeds Quickly

Knowing how to grow grass effectively would mean going over factors like soil condition, seed variety and water availability. These are very important considerations before learning how to plant grass seeds the quickest possible way.

There are a lot of reasons why most homeowners now want to learn how to grow grass. One reason is the natural beauty it can project ensuring healthy looking lawns. Before, what people only know to plant grass seed the slow way. This is done by initially prepping the ground using a rake before putting down a slim layer or top soil. Afterwards, grass seeds are sprinkled before another layer of top soil is placed.

There are various ways on how to grow grass quickly. In one method, you would need materials like 2 to 3 medium bags (20 lbs.) of top soil (even cheap ones are okay), 5 pounds of grass seeds, a shovel and a garden cart or wheelbarrow as well as a hose/sprinkler and rake (optional).

Step 1 Pour one or two bags of top soil into the wheel barrow. Then, break it a little to make it somewhat loose. As a tip you can put one bag inside the wheel barrel and use the shovel by bringing it down on one end of the bag before lifting it and allowing the top soil to tumble out.

Step 2 For every bag of top soil used, get a handful of grass seeds then, throw it inside the wheel barrel.

Step 3 Use the shovel and mix the seeds and the soil together. Its like kneading bread while mixing in nuts or raisins. Make sure the soil is still fairly loose so that its easier to spread.

Step 4 Shovel out your soil mixture. Then, sprinkle it lightly on your bare spot. You can hold the shovel using your left hand and then use your right hand to twist the shovel (for the soil to shimmy off the end). Keep in mind that you only need a thin layer of soil as well as seed mixture.

Step 5 When youve distributed all the soil and the seed mixture, set up a sprinkler so that you can water that spot from time to time.

With this method, the seed and soil mixture can grow grass quickly. This is since you are putting down some rich soil together with the seeds all throughout and not just underneath or on top of it. However, you also need to understand that therell also be bad times when you plant grass seeds. There are types of grass that can be pretty hard and will even grow without much trouble, especially if the conditions are just right.

The above-mentioned method can effectively grow grass whether in large or small areas. Many find it even easier to just rake over a bare spot and loosen up existing soil before throwing in a quick layer of seed.

27 Oct

Silver Ore Processing Plant

Silver ore is usually mined from underground mine and some in open pit mine. The run-of-mine silver ore will be sent to Silver Ore Processing Plant which includes crushing, washing, grinding process.

Firstly, the silver ore mined will be conveyed to a stock bin before crushing and grinding. The silver crushing and grinding plant can handle harder silver ore as well as increasing the plant throughput. The outflow from the mill enters a vibrating screen and the oversize is directed to a CS cone crusher before being returned to the mill. Screen undersize enters a ball mill/cyclone circuit before entering the flotation plant rougher cells.After crushing and grinding process, the silver ore will be conveyed to flotation plant. Them the silver ore will be sent to silver smelter or silver refinery.

Silver Ore Crushing Plant
When exploring the silver, we must take into account the actual geographical conditions. And whether the open or indoor exploration, the large-scale automatic mining equipment should be used. And the mining machinery equipment is mainly composed of the monitor, dust-free equipment, silver crushing plant, wind flow equipment, ball mill, classifying equipment.

Among all the silver exploration equipment, Zenith Machinery can provide customers with trustworthy high-quality Silver Ore Processing Plant in Africa. The common silver crushers are: CS cone crusher, PE jaw crusher, JC jaw crusher, PFW impact crusher, etc. Our CS cone crusher is strongly recommended, as it is widely used for silver ore crushing and other rock ore crushing. In addition, we also suggest you try our new mobile crushing plant, which is finally designed through adopting the latest advanced technology, as it is more flexible and will bring you more convenience.

Silver Ore Grinding Mill
Silver mill is the major silver grinding machine to grind the crushed silver ore. Zenith Machinery can design and manufacture many types of silver mills for silver grinding. The common silver mills are: ball mill, Raymond mill, MTM trapezium mill, MTW trapezium mill, ultrafine mill etc. And the ball mill is the most widely used silver mill to grind the silver mill.

The ore is crushed to -5 inches in primary cone crushers, then reduced to -1/2″ in short head cone crushers. The ore is then ground to -100 mesh in ball mills. Using wet magnetic separators the silver ore is separated and further reduced to -200 meshes in a ball mill. Classification is accomplished with screens and cyclones.

25 Oct

Excellent Office Plants that Improve Air Quality

Whenever an interior designer wants to liven up a room, decorating with living things is one of the best ways to do it. Plants are typically the first decorative choices to accessorize an office because they bring a certain sense of vitality to an otherwise industrial look. However, what some interior designers may not realize is that desk plants are actually extremely healthy for office environments too! Cities are full of terrible pollutants that can take a toll on health, and plants provide beautiful air purifiers. If you’re looking to liven up your office space, and feel a little healthier as well, here’s five great plants for the home and office that may have you breathing a little easier!

Spider Plant

Spider plants are great for office environments in particular because they bring tons of life to a room with very little care. This plant does well in hanging baskets or pots with lots of rich soil, and can survive infrequent waterings. It prefers bright sunlight, but can thrive well under artificial lighting for office workspaces too. Reseachers at the University of Hawaii performed studies on this little beauty that proved it as a great plant for cities. They found that spider plants are one of the top leafy greens for removing harmful VOCs from the air indoors. As a result, people around this plant breathe easier and have less toxins in their system to impair cognitive function. And best of all, they feel better. For all these reasons and more, it is the perfect plant for those that work high in the skyscrapers!

Peace Lily

If you want a plant that looks just as beautiful as the rest of your office, say hello to the gorgeous peace lily! This pretty plant looks best sitting on the corners of great corner desks for office use while it’s young, and looks just as elegant in a corner of it’s own as it grows bigger. Studies by the University of Minnesota, Penn State, a University of Technology in Taiwan, and even NASA and the U.S. military have all produced results that have proven the peace lily’s extraordinary air cleansing abilities. Like the spider plant, it is adept at removing harmful VOCs from the air. It does well in nutrient rich potting soil with loose dirt and plenty of drainage. For those that want frequent flowerings, this plant requires a bit more waterings for those that can handle the task!

Lemon Balm

Stuck in an office that’s prone to mold or other smelly smells? Then the lemon balm is the desk plant for you! This aromatic plant provides all the air cleansing qualities you would want and even puts off a wonderful perfume all it’s own. As you may have guessed, the lemon balm smells a lot like lemons, and studies have shown that it is great for improving mood. They do wonderful in office environments that don’t get a whole lot of sunlight, making them ideal accents in stylish cubicles for office environments. Just plant this lovely little shrub in a size appropriate pot and water it frequently for an aromatic office that everyone within a whiff of will surely appreciate.

Golden Pothos

In another NASA study, the golden pothos proved to be a top air cleanser alongside the peace lily. This pretty little plant boasts adorable heart-shaped leaves that compliment modern executive desks for home office use with ease! Hardworking moms and dads are sure to love it, and they make great gifts for holidays. They thrive beautifully in low-light environments, making them perfect for both home and corporate office environments. They actually prefer slightly dry soil and being a little bit root bound, so don’t worry too much about proper care. All they ask is a an appropriately sized pot or hanging basket, and they’re ready to get to work cleaning your office air!

Gardenia

A grandmother’s favorite for a reason, gardenias are perfect for gardens and offices alike. According to research from Rugers, this beautiful little plant makes an excellent air cleaner and actually improves your mood as well. Just a few whiffs of its wonderful scent will have you swooning. Its classic look and brain stimulating qualities make it the perfect plant to sit on the edge of pretty glass desks for computer use in either home or public office environments. With moderate sunlight and a bit of fair care, your gardenia may even last your whole career as they can live for up to twenty-five years!

24 Oct

House Plant Care – Insect Control in Garden Fruit Plantings

Growing fruit in the home garden can be an interesting, fun and rewarding hobby. This does not happen without a great deal of work. House plant care can be very easy with a few tips to keep them healthy.
Control of pests (diseases and insects) is an integral part of the care necessary to obtain good results. Insect infestations reduce yields and lower the quality of harvested garden vegetables and home fruit plantings. All plant parts may be injured by insects. Some insects bore into roots, seeds or stems. Others destroy crops by chewing on the succulent foliage, stems or fruits. Plant diseases are carried by certain insects. Control can be maintained all season by a combination of cultural practices, mechanical control, biological control and chemical applications.
Cultural practices such as pruning, sanitation, variety selection and selecting open, sites for planting are necessary for good pest control.

How to Use the Spray Schedules

Most fungicide (disease control product) and some insecticide (insect control product) applications are effective only if applied preventatively. The timing of these preventive sprays is based on the growth stage of the plant and forms the foundation of the spray charts that follow. In very rainy seasons, sprays may need to be applied more frequently than the schedule given in the following charts. Wet weather favors development of the disease causing organisms and more chemical protection is needed. Also, rains can wash off the fungicides and insecticides. When rain occurs before a spray has dried or if rainfall totals more than 1 inch within 24 hours, the spray should be re-applied. Fungicides provide more benefit when applied before a rain than after, because protection from infection by disease-causing organisms is needed when plant surfaces are wet.

Additional Spray Tips

One of the biggest mistakes home fruit growers make is to allow their trees to grow too tall. If trees are maintained at a manageable height, it is easier to spray them properly, as well as to harvest the fruit. Proper pruning practices reduce the amount of spray needed and permit better coverage. The type of sprayer used depends on the size of the fruit planting. For most plantings of small fruits or for a few small fruit trees, pump-up sprayers are adequate. Trombone-type sprayers are helpful for taller trees. For the increased spray volumes required by larger home orchards, power sprayers are recommended. Honey bees and other pollinating insects must be protected from insecticides, which will kill them. Do not spray fruit plants with insecticides while the plants are in bloom.

Pesticide Safety

Most of the pesticides suggested for use are low-toxicity materials. However, some precautions are needed:
Keep pesticides in the original, labeled container.
Keep pesticides in a locked storage cabinet, away from children or pets.
Read the label each time before you use the product.
Wear rubber gloves, goggles, a long-sleeved shirt, long pants and a hat when mixing and applying pesticides. Refer to the label for required protective gear.
Handle the pesticide carefully when mixing. Avoid breathing dust or vapors. Wash any chemicals off the skin immediately with plenty of water.
Never apply insecticides and fungicides with a sprayer that has been used for weed killers.
Do not spray if it is windy.
Mix only as much as you need. Do not store diluted spray mixtures from one application to the next. They will lose effectiveness and are unsafe.

Multipurpose Fruit Spray

Growers with small fruit plantings may want to consider multipurpose fruit spray products. These materials are widely available, convenient and will serve most pest control purposes. They are mixtures containing a fungicide (captan), and usually two insecticides (malathion and methoxychlor). Multipurpose sprays are produced by several companies and sold under names such as Home Orchard Spray 7, Tree Fruit Spray, All Purpose Fruit Spray7, General Purpose Fruit Spray7 and others. Certain brands contain an additional insecticide, carbaryl (Sevin). Mixtures containing carbaryl should not be applied to apple or pear until 21 days after petal fall, as it causes the fruit to drop.

Sanitation and Cultural Practices

APPLE AND PEAR
Apple and pear trees are subject to serious damage from pests. The following practices will improve the effectiveness of the pesticides and may lessen the need for sprays.
Plant disease-resistant varieties. Varieties resistant to cedar-apple rust, scab and powdery mildew are also available.
Rake and destroy leaves in the fall, if apple scab, pear scab or pear leaf spot are problems. The organisms that cause these diseases overwinter in infected leaves.
For cedar-apple rust control, elimination of the source of spores – cedar trees – is effective but not always possible. Removal of the galls caused by the fungus on cedar trees is helpful. Pruning trees according to recommendations improves control of all ground diseases. In well-pruned trees, air circulation and sunlight penetration are improved. This helps control diseases by promoting rapid drying after rains and dew. Penetration of sprays into the canopy is also better if the trees are well-pruned.
Prune out and destroy all dead or diseased shoots and limbs during the dormant season. This helps reduce fire blight, fruit rots and certain leaf spots, as the organisms that cause these diseases overwinter in the wood.
PEACH, PLUM AND CHERRY
Peach, plum, cherry and other stone fruits are commonly affected by serious pest problems and, as a result, a conscientious spray program is needed. The following sanitation and cultural practices will improve the chances of success and may lessen the need for sprays.
Prune trees according to recommendations, to allow better air circulation and sunlight penetration. This helps control diseases by promoting rapid drying after rains and dew. Penetration of sprays into the canopy is also better if the trees are well-pruned.
Remove the overwintering structure for the brown rot fungus, old mummified fruit left hanging in the tree or on the ground.
Control of black knot of plum and cherry is dependent on removal of the knots before they begin to produce spores. In late winter, prune out and destroy these rough, black swellings or tumors that develop on limbs and twigs.
Avoid planting peach varieties that are highly susceptible to bacterial leaf spot. Examples are Elberta, Halehaven, Rio- Oso-Gem and Sunhigh. Chemical control of this disease is very limited.
GRAPE
Most home grape plantings will require a preventive schedule of pesticides, since certain pests such as black rot can completely destroy a crop of fruit. However, the following sanitation and cultural practices will reduce the need for pesticides.
Keep vines well-pruned according to recommendations, to prevent overgrowth of vines and dense canopy. Pruning promotes air circulation and sunlight penetration, thus more rapid drying after rains and dew. Penetration of sprays into the foliar canopy is also better if the vines are well-pruned.
Remove mummified berries (shriveled, dry, raisin-like). Clusters on the vines as well as those that have fallen to the ground should be removed. Also, destroy infected canes that have been pruned off. For control of grape root borer, mounding soil makes it difficult for larvae to reach the roots or adults to emerge. Mound some soil 1 foot high for 12 feet around each vine between early and mid-June.
STRAWBERRY
An intensive, preventive spray program is generally not needed on strawberry. Treatments can usually be made on an as-needed basis. The following sanitation and cultural practices will reduce the need for pesticides.

Bed renovation immediately after harvest is crucial to managing pest problems. Renovation involves narrowing rows, mowing leaves, removing weeds and fertilization. Rake and destroy cut-off leaves and stems after renovation.
Maintain narrow rows throughout the growing season (maximum 18 inches wide), to maintain good sunlight and air penetration of the canopy. This provides good berry formation and rapid drying after rains and dew.
Plant varieties with resistance to red stele and leaf spot. Where anthracnose is a problem, consider the resistant varieties Delmarvel and Sweet Charlie.
Control weeds throughout the growing season. Weeds increase disease by shading the plants and by interfering with air circulation. Weeds also harbor many insect and mite pests.
Mulch with straw before berries begin to lie on the ground, to reduce gray mold and leather rot (fruit rots).

Safe Handling of Insecticides

Home gardeners can control insect pests with reasonable safety by observing these safety rules:
Keep insecticides in the original, labeled container.
Keep insecticides in a locked storage container.
Read the label each time you use the insecticide.
Measure the amount to be mixed carefully.
Do not exceed the recommended rate of application.
Handle the insecticide carefully when mixing to avoid splashing of liquid concentrates and billowing of dusts and powders.
Wear protective clothing and other personal protective equipment as dictated by the label.
To protect yourself when mixing insecticides, it is suggested that protective clothing and equipment, such as chemical-resistant gloves, a long-sleeved shirt, long pants and protective eyewear, be worn.
Wash all insecticides off the skin immediately, using plenty of soap and water.
Avoid breathing the spray mist or vapor.
Always mix insecticides outdoors near a source of water.
Clean up any spilled materials to prevent children from entering a heavily contaminated area.
Apply insecticides to only those plants listed on the label.
Observe the time intervals between the last application and harvest.

The severity and type of pest problems on garden vegetables usually vary considerably from year to year. During most growing seasons, consistent production of high quality vegetables is assured only with the use of pesticides for insect control. This is not to suggest that vegetables cannot be grown without pesticides by using nonchemical methods, but it will usually take more effort on the part of the gardener.

22 Oct

Plant Spirit Shamanism – The Medicinal & Healing Plants of the Amazon Rainforest

Cats Claw (una de gato); Cat’s Claw is a tropical vine that grows in rainforest. This vine gets its name from the small thorns at the base of the leaves, which looks like a cat’s claw. These claws enable the vine to attach itself around trees climbing to a heights up to 150 feet. The inner bark of this vine has been used for generations to treat inflammations, colds, viral infections, arthritis, and tumors.

Cat’s Claw can be used as tonic to boost the body’s immune system. And is considered by many as a balancer returning the body’s functions to a healthy equilibrium. Its has anti-inflammatory and blood cleansing properties as well as being able to clean out the entire intestinal tract and therefore helps treat a wide array of digestive problems such as gastric ulcers, parasites, and dysentery.

From a psycho-spiritual, plant spirit, or shamanic perspective in which disease and illness can be initiated by a spiritual imbalance within a person causing the person to become de-spirited, or losing heart (in the West we would call this depression), it can restore this inner sacred union of spirit and physical body.

The medicinal properties of this plant are officially recognized by the Peruvian government and it is a protected (for export) plant. It is available widely in the west in capsule form. In the markets in Iquitos it is available in bark form, and many indigenous communities are increasingly cultivating this plant

Boahuasca; Used to heal Cancer of the stomach and intestines and prolapses. Also used against Uta, and cancerous, malignant wounds. The shaman’s make an ointment from the ash and apply directly.

The underlying truth that is revealed in working with the plant spirit or consciousness is that we are not separate from the natural world. We perceive ourselves to be separate beings with our minds firmly embedded within our being (typically our head). The plants can show you that this way of being is an illusion and that we are all connected, all of us and everything else is a discrete element in the great universal field of consciousness. This is an area where the ancient knowledge of the peoples of the rainforest and modern quantum physics point in the very same direction, Reality is an illusion, albeit a persistent one Albert Einstein.

Another way of seeing the shamans diet is that like the platitude all roads lead to Rome, all plants lead through different paths of experiences to the same place, i.e a deep and expanded understanding of ones place in the world around us and a recognition of self as an intrinsic element of this.

The indigenous people of the Amazon see life as having enough purpose just as it is. Fulfilment comes from being in tune with the spirits so there is an abundance of fish, bananas, yucca for making masato (alcoholic beverage), and plenty of healthy children, in short, life is for being happy!

21 Oct

How and when to hire a power plant

Temporary power plants are essential energy solutions for power grids or communities that are suffering from down time. They can be set up to help stabilise towns or industries that are having problems with their local grid and provide much needed back up power until a permanent solution has been reached.

When a community or industry’s energy demands exceeds the capacities of their current plant, a temporary solution is a good way to ensure energy is efficiently provided while a long term strategy is put in place. It’s the perfect, non permanent way to supplement a grid in a large scale and without running up large, unnecessary bills from numerous small solutions trying to do the same thing.

A temporary power plant also offers the ability to implement seasonal peak shaving. This is when a temporary or additional source of power is used during busy or peak seasons to stabilise a supply that might otherwise struggle under demand. It is often a good and growing solution in countries that experience extreme temperatures or in hydro dependent countries that suffer from a lack of rainfall. It is used to supplement renewable energy sources that are not able to provide the energy needed during times of drought or low wind speeds.

In these tough conditions a temporary solution can be used to help to prevent outages, and often for only a few hours a day during peak seasons. What’s more, because it is only used during peak times, it doesn’t accrue costs throughout the year. Demand is also increasingly on the up due to the number of governments who are attempting to introduce renewable power solutions. These typically dependent on natural resources such as wind or rain and can therefore suffer teething problems best alleviated with some temporary help.

Another application for a temporary power plant is as way to continue to provide an uninterrupted power supply during breakdowns or scheduled maintenance. The ease and speed with which a plant can be set up and switched on can minimise down time and ensure inconvenient blackouts are avoided. They are also often called into service to provide power for large construction sites or projects that need more energy than can be provided by small-scale generators.

When choosing the best temporary power plant to suit your needs, due to the nature of most applications, you’re normally going to need a company that is able to respond and provide you with a power plant hire solution rapidly. Flexibility is another major factor to consider when choosing a supplier. You want to be sure that the installed capacity of a rental package can be increased or decreased incrementally and that any required equipment can be rented on a short or long-term basis.

It’s also essential that you choose a temporary power plant provider that will offer you an initial assessment of need to service back-up site as this can help you ensure you are able to choose the best solution for your power needs.

5 Oct

Enrich a Garden’s Pristine Setting with Pots, Plants and Egyptian Statues in Melbourne

Gardening has turned into a popular hobby in Melbourne. It is an enjoyable and healthy way of enhancing an environment and also acquiring some exercise. But it is quite difficult in getting anything in the garden completed with effectiveness especially if the gardener does not invest proper time to plan their gardening materials and equipment. The right equipment such as pots, plants and garden statues will allow for flexibility and creativity while designing a garden which fits the specific requirements of their home.

3 best garden equipment that every gardener should have

Terracotta pots- buying good quality flower pots is a good idea particularly if there are lots of plants in the garden. Terracotta pots in Melbourne are a personal favourite because along with helping people to grow plants in it, this can also serve as an excellent garden ornament. The gardener will discover a huge difference in their saving particularly when they utilize the flowering plants they have as garden decor. By using terracotta pots as a garden design the gardener can keep all his worries about his plants at bay. Safe from the climatic conditions- the sun, the wind, cold temperatures and the rain, there is simply nothing which these pots cannot beat

Egyptian statues- garden statues can turn a garden into a fascinating and magical place and also help to transform a dull corner into a wonderful focal feature. It can also be utilized as a garden’s focal point. Garden statues are available in different types of which Egyptian statues in Melbourne is in great demand. These come in myriad colours, forms, shapes and sizes and will work wonders in designing elements and adding colour to a garden and yard. Placing an Egyptian statue in a garden in fact has turned into a trend amid the homeowners in Melbourne. This will help in adding flamboyance to a garden’s overall appearance and also the home as a whole. There cannot be a better way of charming guests

Artificial plants- People today live in a world that is ever changing. They strive in seeking more cutting edge, fashionable and modern products for making their lives more comfortable, enjoyable and less stressful. In fact they like viewing, being around as well as having nice things. Pleasing, colourful and pretty things at work, at home or in any place where they take pleasure of leisure time activities. Going for artificial plants and flowers both for exterior and interior decor is endless. Whether it is placed on the ground or planted in an urn or pot, artificial plants can be used as an excellent garden decor. Artificial plants in Melbourne today are available in a plethora of style, colours and sizes to help a gardener pick the best

Having a lush and well-maintained garden is every homeowners dream. This can also be a good asset when it comes to property value. The presence of terracotta pots, exotic Egyptian statues and artificial plants can help to further enrich a garden’s pristine environment.

About Author – In this article Jennifer Anderson has elaborately explained on what makes terracotta pots in Melbourne, artificial plants and Egyptian statues in Melbourne a personal favourite. She has also laid emphasis on how these garden accessories can help to enrich a garden’s pristine environment.